Lace Mold Bowl ft. C-29

Create a Bowl using Lace

1. Roll a slab
2. Compress on both sides
3. Lay the lace pattern on the slab
4. Gently press the lace into the clay with a rolling pin
5. Cut around the shape of the lace
6. Drape the slab into a bowl mold
7. Carefully peel off the lace
8. Once the clay is firm, remove the slab from the mold
9. Tap the bottom of the bowl on a flat surface to create a foot
10. Flip the bowl upside down and allow it to dry. Doing this helps prevent cracking
11. Once dry, bisque fire to cone 04
12. Use a damp sponge to wipe away dust
13. Apply 3 coats of C-29 Deep Sea using an AMACO Fan Brush. 
14. Apply 3 coats of PC-41 Vert Lustre around the rim
15. Fire to cone 6

Video